Micron Grinding Machine

Staying tuned up with time and technology for over 25years, we at Shalimar aspire to give our customers best solution, better products and services. We strive hard to contribute substantially to the global priority areas of energy conservation and environment protection. For saving energy and achieving good quality products, we have Developed  a  4 ROLLER MILL and a CLASSIFIER for it which ensures consistent output upto 400 Mesh.

PRINCIPLE

Material is grind by pressure friction between stationary bull ring and the rotating rollers, which swing outwards due to the centrifugal force. 

OPERATION

Material to be grind is feed to the grinding chamber through vibro  feeder. The positioning of the ploughs ensures that the material continuously passes between the rotating rollers and the stationary bull ring and as such this brings about grinding process. The ground material is swept by the ascending stream of air and carried to the classifier. Over sized particles are returned by the classifier to the grinding chamber for regrinding. The desired product is carried to the cyclone. The final product is collected at the bottom of the Cyclone while the Air having fine dust is discharged from the Top of the Cyclone and the Dust laden air goes to the Dust Collection Unit where the dust is separated and clean Air is discharged in the Atmosphere.

• MILL

The Mill foundation houses the drive Pulley which incorporates a thrust bearing to support the central shaft and endures the roller loads. The grinding rollers are hinged on the spider. The roller assembly is uniquely designed to prevent the possible entry of fine powder. A perfect ball bearing with neoprene rubber seal is incorporated to prevent the entry of dust to the roller arm assembly. The contact area between roller arms and bull ring is maintained in such a way to achieve uniform and gradual wear & tear of the Roller.

•  CLASSIFIER

The Classifier helps to obtain any mesh size up to 400 mesh by increasing or decreasing the RPM of the Whizzer Classifier through a Variable Speed Drive Motor. A knob is provided to adjust the required mesh. This helps  saving a lot of time, money & Energy. A Gear Box is mounted in the Classifier driven by 10 HP Electric Motor which is designed in such a way to prevent entry of the dust in the Gear Box. 

• BLOWER

The Fan casing is made from 5 mm M.S. Plate and suitable base is mounted with casing for the Electric Motor bearing Housing. The Base is made from 8 mm thick plate. The M.S Fabricated impeller is fitted on the shaft and shaft is mounted with Mono Plumber block and bearings. The double wall impeller provided is dynamically balanced. The blower is driven through a V-belt transmission with the help of Electric Motor.

CONSTRUCTION

The ploughs are cast out of Manganese Steel while the rollers and the bull ring are of Carbon Steel Casting. Classifier, Cyclone, Dust Collector, Blower, Dusting & supporting structure are made of Mild Steel sheet and structural. Heavy duty Base Plate, Shell and Gear Box are made from Cast Iron and Mill Shell Body is single piece casting.