Minimum Order Quantity | 1 Piece |
Brand | Shalimar |
Material | Mild Steel |
Capacity | 500 -50000 KG PER HOUR |
Automation Grade | Automatic |
Heating Resource | any fuel solid,liquide or gas |
Power | Electric |
Color | Gray |
Design | Standard |
I Deal In | New Only |
Country of Origin | Made in India |
Minimum Order Quantity | 1 Piece |
Capacity | 50-5000 KG./Hr. |
Material | Stainless Steel |
Automation Grade | Automatic |
Frequency | 50 Hz |
Phase | Three Phase |
Power Source | Electric |
Voltage | 420 V |
Country of Origin | Made in India |
Colour | Blue |
Finishing | Paint Coated |
Features | Corrosion Proof |
Length | 60-100 feet |
Belt dryer is a continuous convective belt dryer. A well-ventilated layer of product is put on a wire mesh or perforated plate belt conveyor and conveyed continuously through drying chambers. In these chambers, circulating air fans blow hot air through the product vertically. In this process, the circulating air is reheated after each product flow by the heat exchangers integrated into the dryer. The amount of air required to discharge the exhaust vapor from the belt dryer is sucked in by a radial fan and fed to the appropriate zones of the belt dryer. Due to the arrangement of the air inlet and outlet ducts to and from the appropriate zones, the drying air is passed repeatedly through the product layer until it has the optimum vapor content before leaving the dryer.
SHALIMAR Engineering’s Belt drying or conveyor drying systems are used in the chemical and pharmaceutical industries, in food and stimulants, and for dyes and pigments. The belt dryer is suitable for drying free-flowing, crumbly, crystalline, and lumpy products, as well as malleable pastes.
Advantages· Easy maintenance and easy- clean options with simple and efficient access to all internal components
· Easy operation with a fully automatic control system
· High thermal efficiency due to the integrated air circulation fans, thereby optimizing the exhaust air volume and heat recovery from the dryer exhaust
· Good adaptation of the temperature profile to the drying behavior of different product qualities
Features:
1. Suitable for well aerated beds of preformed, crystalline or granular wet feeds.
2. High evaporated efficiencies due to the impingement action in plug flow manner.
3. Gentle drying
4. Uniform drying
5. Material from remains intact
6. Low power demand
7. Continuous operation
8. Closed operation.
Model
Spray Dryer is design according to requirement and usage of Consumer
· Production Capacity = 50-5000 KG./Hr. water/solvent evaporation (According to Requirement of client)
· In Put moisture = 10-90%
· Out Put moisture = 1-5% (Depend up on property of material)
· Power & Burning Fuels will be depend upon production of material
· So we design plant according to requirement of consumer. |
Minimum Order Quantity | 1 Piece |
Usage/Application | any mineral |
Type Of Crushing Machines | any |
Brand | Shalimar |
Material | Mild Steel |
Capacity | 500-20000 kg./hr. |
Color | auto paint |
I Deal In | New Only |
Brand/Make | Shalimar |
*Your information is safe with us.
Minimum Order Quantity | 1 Piece |
Capacity | 50-5000 KG./Hr. |
Material | Mild Steel |
Max Temperature | 250 |
Design | Customized |
Heating Resource | COAL,BAGAS,WOOD |
Country of Origin | Made in India |
Usage/Application | Industrial |
Material Handling Capacity | 1500 Kgs |
Capacity | 50 Kg Per Feet |
Material | Cast Iron |
Brand | Shalimar Engineering |
Speed | 1-2 m/s |
Automation Grade | Semi-automatic |
Length | 40 Feet |
Belt Material | Rubber |
Inclination | Inclined, Horizontal |
Features | Corrosion Proof |
Belt Width | 200 mm |
Operating Speed | 2800 RPM |
Voltage | 380 V |
Frequency | 50-60 Hz |
Belt Thickness | 20 mm |
Speed Adjustable | Yes |
Electricity Consumption (Kw) | 400W |
Country of Origin | Made in India |
Shalimar Belt Conveyors are predominantly used for handling all types of packing or loose products. Depending on the use, the belt finish can either be a grip surface for inclines, low friction quality; this is achieved using rubber, canvas or specified materials. The frame construction can also be manufactured in various materials, e.g. mild steel, powder coated, zinc coated or stainless steel. Fixed or variable speed can be achieved via an extremely mounted end drive unit, or motorized drum assembly. Roller bed is usually preferred because it requires low power, and the belt has a longer life. Slider bed is used for loads with small, regular bases, conveyor – loading areas and next to operators such as assembly stations, because it does not have high – speed travelling and heavy load capacity. These conveyors are ideal for general goods transportation in application such as packing, testing, inspecting, recycling and various assembly line operations.
1. Packing Table/Assembly
2. Troughed belt
3. totally enclosed system
4. wire mesh
ApplicationShalimar belt conveyor is widely used for transferring lump materials or manufactured products in mining, construction, metallurgical industries and other industries, for example, when coal, mineral ores, rock stones are crushed and some other products are packaged, our belt conveyors can be used to transport them
Capacity | 500-50000 KG PER HOUR |
Speed | 1-2 m/s |
Application/Usage | Industrial |
Automation Grade | Semi-automatic |
Length | 10-200 FT |
Brand | Shalimar Engineering |
Driven Type | Motor |
Type | Vertical Conveyors |
Material | Stainless Steel |
Surface | PAINTED |
Design | CUSTOMIZE |
Alignment | SELF |
Size | 250-1500' |
Color | AS CLINET LIKE |
Conveying Distance | 10-200 FEET |
Conveyor Speed | 60 MEATER PER MINIt |
Diameter | 100-450 |
Frequency | 50 |
Rated Voltage | 415-440 |
Motor Volt | 415-440 |
Shalimar belt conveyor is widely used for transferring lump materials or manufactured products in mining, construction, metallurgical industries and other industries, for example, when coal, mineral ores, rock stones are crushed and some other products are packaged, our belt conveyors can be used to transport them1. High capacity.
2. Standard parts.
3. Simple structure.
4. Easy Maintenance.
5. Easy to operate.
6. The length of the belt is customized.
7. Easy installation
8. High load bearing capacity
9. Low power consumption
10. Negligible maintenance
Technical dataModel | Width???mm??? | Speed 20-120 Meter- mints | Capacity???t/h??? | Power |
SBC 200 | 200 | Up To 5 | 1-2 | |
SBC 300 | 300 | Up To 25 | 2-3 | |
SBC 500 | 500 | Up To 100 | 4-7.5 | |
SBC 650 | 650 | Up To 200 | 4-11 | |
SBC 800 | 800 | Up To 400 | 5.5-18.5 | |
SBC 1000 | 1000 | Up To 500 | 7.5-22 | |
SBC 1200 | 1200 | Up To 750 | 11-30 | |